ASTM D6251 MIL SPEC CRATES
This specification covers the fabrication and closure of empty and full wood-cleated, hereafter referred to as wood-cleated, panelboard boxes. These boxes are intended for use as containers for domestic and overseas shipment of general materials and supplies, not exceeding 1000 lb [454 kg] depending on box type.
Need ASTM D6251 M Assistance
Fields marked with an asterisk (*) are required.
STANDARD SPECIFICATION FOR WOOD-CLEATED PANELBOARD SHIPPING BOXES
ASTM D6251 / D6251M-19
Wood-cleated panelboard shipping box performance is dependent on its fabricated components and subsequent assembly; therefore, a variety of types, classes, styles, and treatments reflecting varied performance are specified. This specification, however, does not cover wood-cleated panelboard box performance under all atmospheric, handling, shipping, and storage conditions.
If the use of other construction methods or techniques is acceptable and permitted, the resulting packaging systems shall be of equal or better performance than would result from the use of these specified materials and procedures. The appropriate distribution cycle, specified in Practice D4169, can be used to develop comparative procedures and criteria.
The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
We have earned our enviable industry reputation in part because of our four decades of experience and knowledge of the U.S. Department of Defense’s detailed military packaging specifications and regulations.
We are experts in the complex military packaging and labeling requirements. We make sure your package gets delivered to it’s desired location on-time at a lower cost than you can do yourself.