MIL-PRF-16173E
This specification covers solvent-dispersed corrosion preventive componds that deposit thin, easily removable films after evaporation of solvent.
Need MIL-PRF-16173E Assistance
MIL-PRF-16173E
PERFORMANCE SPECIFICATION: CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION (06 JAN 1993) {SUPERSEDES MIL-C-16173D]
MIL-PRF-16173 E CORROSION PREVENTIVE COMPOUNDS
This performance specification covers solvent-dispersed corrosion preventive compounds that deposit thin,easily removable films after evaporation of solvent. Classification. Corrosion preventive compounds covered by this specification are furnished in the following classes and grades.
Classification. Corrosion preventive compounds covered by this specification are furnished in the following classes and grades, as specified (see 6.2).
Classes. The classes of the corrosion preventive compounds are designated by ‘Class I’ (High volatile organic compounds (VOC)) or “Class II” (Low VOC) as follows:
Class I – High VOC – VOC exceeding 2.8 pounds per gallon (lbs/gal) (340 grams/liter).
Class II – Low VOC – VOC not exceeding 2.8 lbs/gal (340 grams/liter).
Grades. The grades of the corrosion preventive compound are the following:
Grade 1 Hard film (175 degrees Fahrenheit (ºF) 80 degrees Celsius (ºC) minimum flow point of
solvent deposited film).
Grade 2 Soft film.
Grade 3 Water displacing, soft film.
Grade 4 Transparent, non-tacky film.
Grade 5 Low pressure steam removable film.
MIL-SPEC Contracts
We have earned our enviable industry reputation in part because of our four decades of experience and knowledge of the U.S. Department of Defense’s detailed military packaging specifications and regulations.
MIL-SPEC Labeling
We are experts in the complex military packaging and labeling requirements. We make sure your package gets delivered to it’s desired location on-time at a lower cost than you can do yourself.
